IT: iDET Queensland connection process

There following things need to be done when connecting a BuildBee CloudDock to the Queensland iDET network. For full instructions on configuring a BuildBee CloudDock, please refer to the Configuring your BuildBee CloudDock help article.

Step 1 - Whitelist BuildBee domains

- Whitelist the sites at test.buildbee.com and test.buildflow.online each year. For more info, see our IT: Domains for whitelisting.
- The easiest way to whitelist the required domains is to add buildbee.com, *.buildbee.com, buildflow.online and *.buildflow.online to cover all subdomains. Each school will need to request the websites to be whitelisted every 12 months.

Step 2 - Configure your BuildBee CloudDocks

- When filling out the configuration details, choose the 'ENTERPRISE WIFI WITH PROXY' option.

- The WiFi Network Name (SSID) is iDET.

- The proxy server in all EQ schools is proxy2.eq.edu.au

- When filling out the WiFi username section, the schools domain has to be in front of the user. e.g. gbn\user0 

The domain may be different depending on the school. Generic usernames can be created by the school so it's possible to have a user called buildbee.1025 where 1025 is the school ID.

Here is an example configuration:

• Related Articles

• Get Started with BuildBee

  Congratulations! You’re the proud new owner of our latest and greatest CloudDock! With this awesome piece of technology, you can control your 3D printer over the Internet. BuildBee is comprised of two products. Firstly, a physical control box called ...

• IT: Connecting to the Victoria EduSTAR wired network

  There following things need to be done when connecting a BuildBee CloudDock to the EduSTAR wired network. For full instructions on configuring a BuildBee CloudDock, please refer to the Configuring your BuildBee CloudDock help article. Step 1 - ...

• IT: NSWDoE Schools Installation - central server connection

  This guide is for schools using the "detnsw" network and connecting to the central server.  Configuration for schools using the "Internet @ edge" method may connect differently. To connect your 3D printer to the BuildBee app, you must first configure ...

• Create or connect a BuildBee CloudDock

  You can now make your own BuildBee CloudDock with existing Raspberry Pi hardware using the built in wizards in BuildBee Desktop. Simply launch the wizard and follow the steps. Prep - Make sure you have all the required hardware - Raspberry Pi 3B or ...

• IT: Finding the IP address and MAC address of a BuildBee CloudDock

  If you are troubleshooting the Internet connection of a BuildBee CloudDock, knowing the IP or MAC address of the device may help you out: Getting the CloudDock IP address Method 1: BuildBee enterprise tools This method is only available to users with ...